Topic: How to scan
laminated cards with transparent edge using the BCR900C
Scanner affected:
BCR900C only
When scanning a
laminated card which has a wide transparent laminated edge, the scanner
may not detect the presence of the card. This is because the wide transparent
edge of the card interferes with the card sensor on the scanner. The
sensor is located just under the scanning notch next to the SCAN button.
- Solution:
- Fold a strip of paper to cover the
transparent edge on the (right) side of the laminated card where the
sensor is located. Place the folded paper strip over the top of the
card and insert the card into the slot for scanning. Make sure that
the right edge of the card is covered by the paper strip, and the
card fits under the notch next to the scan button.
