How to prevent the scanner from periodically prompting the user to calibrate
Note: The scanner driver will prompt
the user to calibrate the scanner when it is unable to access the
calibration file. You should ensure that the user account is able to
access the calibration file. Please refer to this link for more
information on "Calibration
Files".
You can disable
the calibration prompt by doing the following:
1. Make sure that you are using the latest scanner driver available from
our website.
2. Startup the TWAIN compliant application that you normally use
for scanning. If you do not have a Twain compliant application, you can
use the ScanToFile program found in BizCardReader 6.3 (or higher). After
you install BizCardReader 6.3, the ScanToFile program is found in
Start...Programs...BizCardReader...ScanToFile.
3. Start up the scanning application, and
select the appropriate card scanner. If you
are using ScanToFile, click on File...Select Scanner, and then select
the appropriate card scanner.
4.
Activate a scan using the application; if you are using ScanToFile,
click on File...Scan to activate a scan. The
scanner TWAIN User Interface should pop up.
5. Click on the Calibrate button in the User Interface.
6. Select the "Do not remind me to calibrate" checkbox option,
and then click the "OK" button.
7. Click on the Retry button if you want to proceed with calibration,
or the Cancel button if you want to skip it.