Topic: How to clean
the BizCardReader 901 scanner
The
scanner requires no maintenance except for occasional cleaning. Dirt and
other foreign particles from scanned cards and photographs may
accumulate on the scanning glass and roller after an extended period of
use. If there are noticeable dark lines in the scanned images, the
scanner may need cleaning.
- Turn the
scanner over so that the bottom side faces up.
- Remove the 2
screws located on the bottom of the scanner as shown. Use a small
Philips head screwdriver.
- Turn the
scanner upright and carefully lift off the top cover.
- Wipe away dirt
or other particles from the glass plate and rubber roller with a dry
cotton cloth. Use a small amount of rubbing alcohol if needed.
- Carefully
re-assemble the top cover and screws. Do not use excessive force
when tightening the screws.