BIZCARDREADER Leader in Business Card Scanner and Business Card Reader Systems

          Home                    Products                    Store                    Download                    Support                    About Us
 

Topic: How to clean the BizCardReader 900c, 600c, 300g scanners

The card scanner generally requires no maintenance except for occasional cleaning. Dirt and other foreign particles from scanned cards and photographs may accumulate on the scanning glass and roller after an extended period of use. If there are noticeable dark lines in the scanned images, the scanner may need cleaning.

 BizCardReader 900C Cleaning Procedure

 

  1. Turn the scanner over so that the bottom side faces up.
  2. Remove the 4 screws located on the bottom of the scanner as shown. Use a small flat head screwdriver. DO NOT remove any other screw.
  3. Turn the scanner upright and carefully lift off top cover.
  4. Wipe away dirt or other particles from the glass plate and rubber roller with a dry cotton cloth. Use a small amount of alcohol if needed.
  5. Carefully re-assemble the top cover and screws.

Note: Do not use excessive force when tightening the screws.

 

BizCardReader 600C Cleaning Procedure 

  1. Turn the scanner over so that the bottom side faces up.
  2. Remove the screw located on the bottom-right of the scanner as shown. Use a small flat head screwdriver. DO NOT remove any other screw.

 

  1. Turn the scanner upright and slide the top cover slightly to the right and lift up carefully.
  2. Remove the black rubber roller by lifting it up from the roller slots.
  3. Wipe away dirt or other particles from the glass plate and rubber roller with a dry cotton cloth. Use a small amount of alcohol if needed.
  4. Replace the roller and carefully re-assemble the cover and screw.

Note: Do not use excessive force when tightening the screw.

 

 BizCardReader 300G Cleaning Procedure

To clean the BizCardReader 300G card scanner, follow the same cleaning procedure (a-f) for BizCardReader 600C. The housing screw is similarly located on the bottom left of the scanner; you remove and replace the top housing in the same manner as for the model 600C scanner.

 
  FAQ